|
ASSOCIATION
|
|
OTTPA Garden Tractor Website
www.ottpagardentractors.ca |
|
2017 CORPORATE SPONSORS
Stay tuned for our new corporate sponsors for the upcoming pull season |
|
Registration: 12 PM
Start Time: 10 AM |
|
Registration: 12 PM
Start Time: 10 AM |
|
Schedule is posted on schedule page
2017 SCHEDULE |
|
The upcoming season is fast approaching
Have a look and get your weekends all booked up to attend OTTPA events near you and here some noise |
A puller that comes off the track with a rising temperature has turned a contest into a mechanical and safety problem. The first priority is to stop safely and keep people away from hot metal, steam and fuel. The second is to find out whether the engine can cool normally or whether the machine needs a mechanic before it moves again.
Heat after a heavy pull can come from blocked radiator airflow, low coolant, a leaking hose, a failed fan or damage that appears only under load. The cause may be complicated, but the immediate response is simple: do not make another pull to see whether the warning light disappears. Treat an overheating puller as a stopped machine, not a rough patch to push through.
At an Australian country meet, summer heat, dust, dry grass and a field full of trailers can make the aftermath as important as the run itself. Whether you are pulling at Wagga Wagga, Mildura, Geelong or a local club ground, use the same disciplined approach. Association schedules and host-club directions can guide your planning, but the rules on the day always come first.
Watch the temperature gauge during the run and through the cooldown, rather than checking it only after parking. A steady climb towards the red, a coolant warning light, falling power or an unusual smell should prompt you to ease off and prepare to stop. Puller gauges may be modified, so know how your own instrument behaves and use other warning signs as backup.
Steam near the radiator, a knocking sound, a coolant spill, bubbling from the expansion tank or a radiator that remains hot after a normal idle all need attention. A turbocharged diesel also needs time to cool after a hard pull. Repeatedly revving it to hurry the cooldown can add heat and place extra stress on the turbo and its oil seal.
You might hear someone say the engine needs “a breather”, but that does not mean another start. On a hot, dry day, a small coolant leak can reach the exhaust or turbo quickly and create a fire risk. Restrict access to the machine, keep a safe distance from the hot components and keep spectators well back until the cause is known.
Signal your intentions, reduce the load and guide the machine to a safe place if it is still responding normally. Do not brake hard, weave around the track or rush past people simply to reach the pits. Set the parking brake, lower any raised linkage and switch off the engine once you are on level ground.
Choose bare, firm ground away from dry grass, straw, timber, fuel and spectators. Point the exhaust away from people, fuel tanks and other parked vehicles. Keep helpers from leaning over the radiator or reaching towards a leaking hose. Tell the event official what has happened so the area can be managed and other pullers are not exposed to the hazard.
In hot weather, keep water available and treat confusion or collapse in the crew as a medical emergency. If you see smoke, a strong fuel smell, coolant spraying onto hot metal or any flame, get people away and call Triple Zero (000). Use a suitable dry chemical extinguisher only if the fire is small, you are trained and you have a clear escape route. Never put water on burning fuel.
With the puller parked and the area clear, leave the engine off and allow the engine and turbo to cool naturally. Do not restart it merely to circulate coolant or check the gauge. If the machine builder has specified a different cooldown procedure, follow their written instructions, but never revive an engine that is smoking, leaking or badly damaged.
Never remove the radiator cap, loosen a hose clamp or pry open a cooling-system fitting while the engine is hot. The system can remain pressurised after the gauge falls, and hot coolant can cause severe burns. Do not hose a hot radiator with cold water either; the sudden temperature change can damage hoses and radiator cores. Wait until everything is completely cold.
A badly overheated engine should not be restarted simply to see whether it will idle. Restarting can move damaged internal parts, create more heat or make a repair harder. Arrange a cold inspection and qualified mechanical advice, and explain the full sequence of events. If smoke or a leak appeared, move the machine only when the responsible person says it is safe.
The first mechanical checks should cover coolant level and condition, visible leaks, the radiator cap, hoses, fan operation, belts and the fan clutch. Do these checks with the system cold and follow the machine builder’s instructions, because modified engines may differ from a standard road vehicle. A low coolant level may be the result of a leak rather than the original fault.
Dust is a common culprit at country meets. Look for clogged radiator screens packed with dust, straw or insects, bent fins, a damaged fan shroud or something trapped against the radiator. The fan itself, thermostat, water pump and oil cooler also need attention. A mechanic familiar with competition pullers can check the modified parts that a general workshop might overlook.
Record the temperature reading, run duration, sounds, warning lights, fluid levels and what changed after the pull. Photos of external damage can help with insurance or warranty claims. If the machine has recent modifications, earlier results may provide useful context for the crew. The association’s guide to reading pull results is a helpful reference when comparing classes or equipment setups.
A consistent handover between driver and crew keeps a temperature rise from being dismissed as ordinary engine noise. Use the same checks after every run, especially when the machine has been working hard in the heat. A general packing checklist can help you organise the basics, with the following additions made for an overheating incident.
Tick each item only when it is done, not when someone intends to do it. Keep the completed sheet with the service records so the next driver knows what was found, what remains unresolved and whether the puller has been cleared to compete.
Plan recovery before it is needed, especially at a remote Australian meet where a mobile mechanic may be some distance away. Keep a charged phone, drinking water, gloves, eye protection, a rated fire extinguisher and absorbent material in the vehicle. These items support people and basic protection; they are not a substitute for mechanical work.
A flatbed recovery truck is usually the safest option when coolant has been lost or the engine may be damaged. A modified puller can be heavy and sit awkwardly on ramps, so use an operator experienced with competition vehicles and confirm that its loading gear and tie-down points are rated for the load. Do not improvise with rope or tow the machine with its cooling system still hot.
A farm ute can tow a suitable trailer, but towing limits, vehicle ratings and road rules still apply. Use rated straps, wheel chocks and safe loading angles, and make sure the trailer remains stable and complies with local requirements. Local clubs often rely on commercial sponsors for prizes and facilities, so checking sponsor updates can also help when you are budgeting a season.
Before returning to competition, obtain a clear mechanical result rather than relying on a successful test lap. A proper cold inspection should cover coolant condition, system pressure, fan operation, belts, hoses, the thermostat and any evidence of internal damage. Keep the repair notes and parts invoices with the puller’s service history so the next crew can make an informed decision.
Debrief the run with your crew and mechanic. Explain whether the temperature rose gradually or suddenly, what the gauge showed and whether the engine had just been rebuilt or modified. Share useful lessons with fellow pullers through the association, but keep criticism fair and focused on equipment and preparation rather than blame.
Book a cooling-system check before the next meet, save the checklist on your phone and print a copy for the trailer. Arrive early enough to inspect the puller after travel, and do not compete until a qualified mechanic has cleared it. The safest return to the track starts with a machine that has been diagnosed, tested and ready.
|
T
EST and TUNE
May 20th @ Dan Fair 1208 Sharpe Line, Cavan Contact Dan @ 705-930-4594 Food will be provided, so plan to attend |